cansas1d SAScollimation
From canSAS
- block diagrams
SAScollimation
| Name | Type | occurrence | Description | Attributes |
|---|---|---|---|---|
| distance | floating-point number | [0..1] | Distance from this collimation element to the sample. | unit="{unit}" |
| aperture | container | [0..unbounded] | Description of a slit or aperture. name: Optional name attribute for this aperture. type: Optional text attribute to describe the type aperture (pinhole, 4-blade slit, Soller slit, ...). |
name="{name}" type="{type}" |
aperture
| Name | Type | occurrence | Description | Attributes |
|---|---|---|---|---|
| size | container | [0..1] | Opening dimensions of this aperture. | name="{name}" |
| distance | floating-point number | [0..1] | Distance from this collimation element to the sample. | unit="{unit}" |
size
- geometry
from source
from detector
| Name | Type | occurrence | Description | Attributes |
|---|---|---|---|---|
| x | floating-point number | [0..1] | Dimension of the collimation in X.
The unit attribute is required. See cansas1d_documentation#Rules for acceptable values. |
unit="{units}" |
| y | floating-point number | [0..1] | Dimension of the collimation in Y.
The unit attribute is required. See cansas1d_documentation#Rules for acceptable values. |
unit="{units}" |
| z | floating-point number | [0..1] | Dimension of the collimation in Z.
The unit attribute is required. See cansas1d_documentation#Rules for acceptable values. Note: While Z dimension is allowed by the standard (provided by use of a standard element in the XML Schema), it does not make sense for small-angle scattering. |
unit="{units}" |
