Latex Round Robin: Difference between revisions

From canSAS
No edit summary
Line 14: Line 14:
Data measured with a sample-detector distance of 17.6 m and an incident wavelength of 12 Angstrom and 6 Angstrom
Data measured with a sample-detector distance of 17.6 m and an incident wavelength of 12 Angstrom and 6 Angstrom


<nowiki>Sample    Run Number  Wavelength</nowiki>
<nowiki>Sample    Run Number  Wavelength - 6 A</nowiki>


<nowiki>A           50488         6 A</nowiki>
<nowiki>A, 50488 </nowiki>


<nowiki>B           50489         6 A</nowiki>
<nowiki>B, 50489 </nowiki>


<nowiki>C           50490         6 A</nowiki>
<nowiki>C, 50490 </nowiki>


<nowiki>Solvent     50491         6 A</nowiki>
<nowiki>Solvent, 50491 </nowiki>


<nowiki>E. Cell     50487         6 A</nowiki>
<nowiki>E. Cell, 50487 </nowiki>


<nowiki>Block Beam  50492          6 A</nowiki>
<nowiki>Block Beam, 50492 </nowiki>




<nowiki>Sample    Run Number  Wavelength</nowiki>
<nowiki>Sample    Run Number  Wavelength - 12 A</nowiki>


<nowiki>A           50506         12 A</nowiki>
<nowiki>A50506 </nowiki>


<nowiki>B           50507         12 A</nowiki>
<nowiki>B50507 </nowiki>


<nowiki>C           50508         12 A</nowiki>
<nowiki>C50508 </nowiki>


<nowiki>Solvent     50509         12 A</nowiki>
<nowiki>Solvent, 50509 </nowiki>


<nowiki>E. Cell     50505         12 A</nowiki>
<nowiki>E. Cell, 50505 </nowiki>


<nowiki>Block Beam  50510         12 A</nowiki>
<nowiki>Block Beam, 50510 </nowiki>


===D11 at the ILL Grenoble, France===
===D11 at the ILL Grenoble, France===

Revision as of 11:20, 30 April 2012

Samples

A polystyrene latex sample has been used for round robin measurements. As it is fairly monodisperse, it provides good tests for resolution. The hydrogenous polystyrene latex designated PS3 has been prepared in Uppsala (Materials Physics, Uppsala University) by Maja Hellsing.

Three samples at nominal concentrations of 0.4%, 0.1% and 0.025% designated A, B and C have been prepared in D2O with 1 mM added NaCl.

Measurements

At present (30 April 2012) the following instruments have been used for SANS measurements on the latex samples:


D22 at the ILL Grenoble, France

Data measured with a sample-detector distance of 17.6 m and an incident wavelength of 12 Angstrom and 6 Angstrom

Sample Run Number Wavelength - 6 A

A, 50488

B, 50489

C, 50490

Solvent, 50491

E. Cell, 50487

Block Beam, 50492


Sample Run Number Wavelength - 12 A

A, 50506

B, 50507

C, 50508

Solvent, 50509

E. Cell, 50505

Block Beam, 50510

D11 at the ILL Grenoble, France

Data measured with a sample-detector distance of 34 m and an incident wavelength of 13 Angstrom and 6 Angstrom Data measured with a sample-detector distance of 8 m and an incident wavelength of 6 Angstrom Data measured with a sample-detector distance of 1.2 m and an incident wavelength of 6 Angstrom

Quokka at ANSTO, Lucas Heights, Australia

Data measured with a sample-detector distance of 20 m and an incident wavelength of 5.08 Angstrom

SANS2D at ISIS, Didcot U.K.

A sample with nominal concentration 0.5% has been measured with a sample-detector distance of 12 m. (This instrument uses a polychromatic beam in time-of-flight mode.)


Data Format

Contributors are encouraged to deposit their data using the cansas1d/1.0 XML data standard for 1-D SAS data within a ZIP or gzip archive file. A WWW form (canSAS/xmlWriter) is available to translate three-column ASCII text data into the canSAS1d/1.0 XML format.

Summary Plot