View source for cansas1d SASdetector

<gallery caption="block diagrams">
Image:cansas1d-v1-7-SASdetector.png
</gallery>

* parent: [[cansas1d_SASinstrument | SASinstrument]]

== SASdetector ==

{| {{Tablestyle}}
|-
! {{Headcellstyle}} | Name
! {{Headcellstyle}} | Type
! {{Headcellstyle}} | occurrence
! {{Headcellstyle}} | Description
! {{Headcellstyle}} | Attributes
|-
|| '''name'''
|| string
| align="center" | [1..1]
|| Text string that identifies the name of this detector.
|| 
|-
|| '''''SDD'''''
|| floating-point number
| align="center" | [1..1]
|| Distance between sample and detector.
|| '''''unit'''''="{unit}"
|-
|| [[#offset | '''''offset''''']]
|| container
| align="center" | [1..1]
|| Offset of this detector position in X, Y, (and Z if necessary).
||
|-
|| [[#orientation | '''''orientation''''']]
|| container
| align="center" | [1..1]
|| Orientation (rotation) of this detector in roll, pitch, and yaw. 
||
|-
|| [[#beam_center| '''''beam_center''''']]
|| container
| align="center" | [1..1]
|| Center of the beam on the detector in X and Y (and Z if necessary). 
||
|-
|| [[#pixel_size | '''''pixel_size''''']]
|| container
| align="center" | [1..1]
|| Size of detector pixels in X and Y (and Z if necessary).  
||
|-
|| '''''slit_length'''''
|| floating-point number
| align="center" | [1..1]
|| Slit length of the instrument for this detector.
|| '''''unit'''''="{unit}"
|-
|}

== geometry ==

<gallery caption="geometry ">
Image:Translation-orientation-geometry.jpg    | from source
Image:Translation-orientation-geometry-2.jpg  | from detector
</gallery>

== offset ==

{| {{Tablestyle}}
|-
! {{Headcellstyle}} | Name
! {{Headcellstyle}} | Type
! {{Headcellstyle}} | occurrence
! {{Headcellstyle}} | Description
! {{Headcellstyle}} | Attributes
|-
|| '''x'''
|| floating-point number
| align="center" | [0..1]
|| Offset of the detector position in X. 
The '''unit''' attribute is required.  See [[cansas1d_documentation#Rules]] for acceptable values.
|| '''unit'''="{units}"
|-
|| '''y'''
|| floating-point number
| align="center" | [0..1]
|| Offset of the detector position in Y. 
The '''unit''' attribute is required.  See [[cansas1d_documentation#Rules]] for acceptable values.
|| '''unit'''="{units}"
|-
|| '''z'''
|| floating-point number
| align="center" | [0..1]
|| Offset of the detector position in Z. 
The '''unit''' attribute is required.  See [[cansas1d_documentation#Rules]] for acceptable values.  Note: While Z is allowed by the standard (provided by use of a standard element in the XML Schema), it does not make sense for small-angle scattering.
|| '''unit'''="{units}"
|-
|}

== orientation ==

{| {{Tablestyle}}
|-
! {{Headcellstyle}} | Name
! {{Headcellstyle}} | Type
! {{Headcellstyle}} | occurrence
! {{Headcellstyle}} | Description
! {{Headcellstyle}} | Attributes
|-
|| '''roll'''
|| floating-point number
| align="center" | [0..1]
|| Rotation about the ''Z'' axis (roll). 
The '''unit''' attribute is required.  See [[cansas1d_documentation#Rules]] for acceptable values.
|| '''unit'''="{units}"
|-
|| '''pitch'''
|| floating-point number
| align="center" | [0..1]
|| Rotation about the ''X'' axis (pitch). 
The '''unit''' attribute is required.  See [[cansas1d_documentation#Rules]] for acceptable values.
|| '''unit'''="{units}"
|-
|| '''yaw'''
|| floating-point number
| align="center" | [0..1]
|| Rotation about the ''Y'' axis (yaw). 
The '''unit''' attribute is required.  See [[cansas1d_documentation#Rules]] for acceptable values.
|| '''unit'''="{units}"
|-
|}

== beam_center ==

{| {{Tablestyle}}
|-
! {{Headcellstyle}} | Name
! {{Headcellstyle}} | Type
! {{Headcellstyle}} | occurrence
! {{Headcellstyle}} | Description
! {{Headcellstyle}} | Attributes
|-
|| '''x'''
|| floating-point number
| align="center" | [0..1]
|| Position of the beam center on the detector in X. 
The '''unit''' attribute is required.  See [[cansas1d_documentation#Rules]] for acceptable values.
|| '''unit'''="{units}"
|-
|| '''y'''
|| floating-point number
| align="center" | [0..1]
|| Position of the beam center on the detector in Y. 
The '''unit''' attribute is required.  See [[cansas1d_documentation#Rules]] for acceptable values.
|| '''unit'''="{units}"
|-
|| '''z'''
|| floating-point number
| align="center" | [0..1]
|| Position of the beam center on the detector in Z. 
The '''unit''' attribute is required.  See [[cansas1d_documentation#Rules]] for acceptable values.  Note: While Z dimension is allowed by the standard (provided by use of a standard element in the XML Schema), it does not make sense for small-angle scattering.
|| '''unit'''="{units}"
|-
|}

== pixel_size ==

{| {{Tablestyle}}
|-
! {{Headcellstyle}} | Name
! {{Headcellstyle}} | Type
! {{Headcellstyle}} | occurrence
! {{Headcellstyle}} | Description
! {{Headcellstyle}} | Attributes
|-
|| '''x'''
|| floating-point number
| align="center" | [0..1]
|| Size of a detector pixel in X. 
The '''unit''' attribute is required.  See [[cansas1d_documentation#Rules]] for acceptable values.
|| '''unit'''="{units}"
|-
|| '''y'''
|| floating-point number
| align="center" | [0..1]
|| Size of a detector pixel in Y. 
The '''unit''' attribute is required.  See [[cansas1d_documentation#Rules]] for acceptable values.
|| '''unit'''="{units}"
|-
|| '''z'''
|| floating-point number
| align="center" | [0..1]
|| Size of a detector pixel in Z. 
The '''unit''' attribute is required.  See [[cansas1d_documentation#Rules]] for acceptable values.  Note: While Z dimension is allowed by the standard (provided by use of a standard element in the XML Schema), it does not make sense for small-angle scattering.
|| '''unit'''="{units}"
|-
|}